Filter
Top Products
p. 3
group assignment features
discrete group assignment switches 1–8
Assignment of post fader signal to discrete group buses unless the pan
switch is activated, in which case the signal is post pan pot. When the
mode switch within the Direct Output section is depressed, the signal
source disconnects from the channel’s main fader and instead obtains its
signal from the set of controls located above the assignment section.
pan–switch
Configures the discrete bus assignment switches to follow the pan control
with left assigned to odd and right assigned to even mix buses.
mono assignment switch
Direct assignment of channel to mono mix bus.Normal signal source from
post fader. (When the mode switch depressed, the signal is sourced from
section above assignment area of console).
left/right assignment switch
Assigns post pan pot signals to left and right mix buses. (When the Mode
switch is depressed, the signal is sourced from section above assignment
area of console).
LCR switch
Reconfigures pan pot to LCR operation,requires the M and LR assignment
switches to also be selected. LCR operaton does not affect the pan to
group buses
pan control
Adjust panoramic image between the Left and Right outputs (Including
groups when pan on is selected) When LCR is selected, provides true
LCR panning between Left and Center and Center and Right buses. Signal
to pan is selected by Mode Switch as normal post fader signal or, when
switch is depressed, as a post direct level control source (Monitor Mode).
mono input module