Filter
Top Products
p. 48
master modules—M1, M2
solo system features
solo-clear switch
When any input or output solo switch is active, depressing the SOLO
CLEAR switch will cancel all soloed channels. When in Input Priority
mode, this switch will only cancel only input channel solo functions.
solo-select switch
Will select operation of the solo system to monitor either pre fader sig-
nals or post fader/post pan pot signals. Mono signals are monitored n
mono, stereo signals are monitored in stereo. This switch may be changed
while in use.
input-priority switch
When in this mode, soloing an input channel will take priority over an out-
put channel only while the input solo switches are depressed. When the
input channel is no longer selected, the console goes back to the previous
output solo condition. When in this mode, the first press of the SOLO
CLEAR switch will clear input channels only; a second, longer press will
clear the output solos.
solo-momentary switch
In this mode, solo switches are active only while they are held down.
last-pressed switch
Takes the console out of its normal cumulative mode and puts it into LAST
PRESSED mode. When a solo switch is already depressed, depressing the
second solo switch will cancel the previous solo switch. When a VCA solo
is activated, this is treated as a single solo switch and all associated chan-
nels are monitored.
solo-isolate switch
When used with consoles linked together, will isolate the solo output of
the slaved console from the master console. This allows for independent
monitoring of linked consoles when desired.
solo active in and out LED’s
Will illuminate if any input or output solo switch is selected and active.
input meter post-switch
Selects operation for all input channel eight-segment metering between
the input pre fader monitor point to a post fader monitor point. The selec-
tion between pre and post fader meter selection is uniform across the
console.