Filter
Top Products
p. 7
aux features
aux send section 5, 6, 7, 8
Four rotary controls, each having the following associated controls:
pre-fader switch
Individual switches for each aux send selects the source of the signal
between the normal post fader signal source position to a pre fader signal
source position. INTERNAL JUMPER - selects pre fader signals as pre or
post EQ (post EQ is default) internal dip switch determines whether pre
source follows channel mute or remains un-muted (follow mute is default).
push-on/push-off switch
Control pot acts as an On/Off switch for the associated auxiliary send.
dual-color on-indicator
Each control has a dual color status indicator indication of on/off/mute sta-
tus. When the aux send is off, the LED is not illuminated. When the aux
send is ON, the LED will illuminate GREEN. When the aux send is ON
but MUTED, the LED will illuminate RED.
INTERNAL JUMPER - selects pre fader source as pre or post EQ (post
EQ is default) and Mute/No Mute functions for all 4 aux sends within this
block. Internal dip switch determines whether pre source follows channel
mute or remains un-muted (follow mute is default).
aux send section 1, 2, 3, 4
Four rotary controls, each having the following associated controls:
pre-fader switch
Individual switches for each aux send selects the source of the signal
between the normal post fader signal source position to a pre fader signal
source position. INTERNAL JUMPER - selects pre fader signals as pre or
post EQ (post EQ is default) internal dip switch determines whether pre
source follows channel mute or remains un-muted (follow mute is default).
push-on/push-off switch
Control pot acts as an On/Off switch for the associated auxiliary send.
dual-color on-indicator
Each control has a dual color status indicator indication of on/off/mute sta-
tus. When the aux send is off, the LED is not illuminated. When the aux
send is ON, the LED will illuminate GREEN. When the aux send is ON
but MUTED, the LED will illuminate RED.
INTERNAL JUMPER - selects pre fader source as pre or post EQ (post
EQ is default) and Mute/No Mute functions for all 4 aux sends within this
block. Internal dip switch determines whether pre source follows channel
mute or remains un-muted (follow mute is default).
mono input module