Peavey V12 Music Mixer User Manual


 
p. 36
stereo matrix / aux out module
dual-aux output features
talkback preset-switch
(one odd channel, one even channel)
When selected will allow the Master Talkback Switch and system to access
this particular output.
µ-mute switch
Sets and indicates microprocessor mute preset status. This illuminated
switch will show current µ mute status preset as illuminated or not illu-
minated. It will show preview next status as either blinking illuminated or
not illumination. Status of this µ mute can be toggled on or off by depress-
ing this momentary switch. This switch may also be directly accessed by
an external sequencer if operating in external control mode.
The status of the µ mute switch is stored in local memory for the current
mute scene, next, and last mute scene without the need to store any
changes to permanent memory. A snapshot of this switch in either active
or next (preview) mode may be stored to permanent memory if desired
from within the master microprocessor controller to any of the micro-
processor storage locations in addition to the current location.
This switch has no effect on the channels actual mute status until the mas-
ter channel mute switch is activated within the master section of the con-
sole. The µ mute may be loaded automatically by the microprocessor sys-
tem allowing sequenced (Master mute switch on at all times) or pre select-
ed mute control (Master mute switch on only when mute preset is need-
ed). If no microprocessor control is required,the master mute switch may
be selected to manual operation, allowing this system to be preset and to
perform as any other manual mute preset.
µ-mute active-LED
Will illuminate RED when the µ-Mute system is commanding this section
to mute.The output master micro safe switch (located adjacent the mas-
ter faders) determines whether or not the mute will actually occur. It is
possible to disable the µ-mutes for all outputs.
illuminated mute-switch
Controls local mute function of this output. This switch illuminates red
when this section is muted (Regardless of source).
100mm output fader
(one per odd channel, one per even channel)
High quality fader per each aux output.