Filter
Top Products
24
En
Changing the settings
1 Press the [INFO(UTILITY)] button for over 1 second.
The [UTILITY] screen is displayed.
2 Use the rotary selector to change the setting.
! When the [BACK (TOP)] button is pressed, the previous screen
reappears.
3 Press the rotary selector.
The changed settings are stored.
! To close the [UTILITY] screen, press the [INFO(UTILITY)] button.
About the auto standby function
When the auto standby function is turned on, the power is automatically
set to the standby mode after the set time has passed with all of the
conditions below met.
—
That none of this unit’s buttons or controls are operated.
— That this unit’s channel level indicator is not lit.
— That the playback function is not operating.
— That no computer is connected to the USB terminal (Type B terminal)
on this unit’s rear panel.
— That remotebox is not connected to this unit.
— That the demo mode is turned off.
Setting preferences
Options settings Selection items Descriptions
WLAN INFO
— For details, see List of WLAN INFORMATION items below.
WLAN SETTING
— For details, see List of WLAN SETTING items on page 25.
MIXER MODE
XDJ-R1*/PC For details, see Changing the [MIXER MODE] on page 27.
A. CUE LEVEL
–36 dB/–42 dB/–48 dB/–54 dB/–60 dB*/–66 dB/–72 dB/–78 dB
Sets the auto cue level. For instructions on setting, see Changing the
auto cue level on page 18.
SAMPLE LEVEL 1 – 50* – 100
Adjusts the volume of the sampled sound sources.
CROSS FADER START
ON/OFF* Playback starts from the cue point when the crossfader is moved.
TOUCH SENSE LEVEL(DECK1) –4 – 0* – +4
Adjusts the sensitivity of the [DECK 1] jog dial.
TOUCH SENSE LEVEL(DECK2) –4 – 0* – +4
Adjusts the sensitivity of the [DECK 2] jog dial.
BACK UP SAVE/LOAD
Loads the disc’s hot cue information stored in this unit.
AUTO STANDBY
OFF/
20 min*/40 min/60 min
Set the time until the standby mode is set.
For details, see About the auto standby function above.
DEMO MODE
ON/OFF* Turns the demo mode on and off.
VERSION No.
— Displays this unit’s software version.
*: Setting upon purchase
List of WLAN INFORMATION items
When [MODE] at [WLAN SETTING] is set to [OFF], only [MODE] and [MAC ADDRESS] are displayed.
Item
MODE
Displays the operation mode of this unit’s wireless LAN function.
SSID
Displays this unit’s [SSID].
SECURITY
Displays the currently set security (encryption) type.
PASSWORD
Displays the currently set password.
IP ADDRESS
192.168.2.3 is displayed.
SUBNET MASK
255.255.255.0 is displayed.
CONNECTED CLIENTS
Displays the MAC addresses of clients connected by WLAN.
MAC ADDRESS
Displays this unit’s MAC address.