Filter
Top Products
37
En
Additional information
Wireless LAN
Problem Check Remedy
Links cannot be established. Is the wireless LAN connection properly
connected?
Properly connect the mobile device and this unit by wireless LAN. (page 11)
See “Basic Operation” in the remotebox operating instructions.
Is another mobile device already connected? Only one mobile device can be connected.
Connection with mobile device is not
possible, mobile device cannot be
operated or no sound is produced.
Is there a device producing electromagnetic waves
in the 2.4 GHz band (microwave oven, other wire-
less LAN device, etc.) nearby?
Either install this unit away from the device producing electromagnetic waves or
stop using the device producing electromagnetic waves.
Are the mobile device and this unit too far apart or
is there an obstacle between them?
Install in the same room within a line-of-sight distance (with no obstacles) of 40
meters. (This line-of-sight distance is rough indication. The actual distance at
which communications are possible may differ, depending on the surrounding
environment.)
Error messages
When this unit cannot operate normally, an error code appears on the display. Check the table below and take the measures indicated. If an error code
not shown on the table below is displayed, or if the same error code is displayed again after taking the indicated action, contact your store of purchase
or a nearby Pioneer service station.
Error code Error type Description of error Cause and action
E-7201
CANNOT READ DISC
TOC data cannot be read.
!
Disc is cracked.dReplace the disc.
!
Disc is dirty.dClean the disc.
!
If operation is normal with other discs, the problem is with that disc.
! The track data (file) may be corrupt. dCheck whether the track (file)
can be played on another player, etc., capable of playing the same
formats as this unit.
E-8301
CANNOT READ DISC
Disc that cannot be played normally is
loaded.
E-8302
CANNOT PLAY TRACK
Track data (file) on the disc or storage
device (USB) cannot be read properly.
E-8303
CANNOT PLAY TRACK
E-8304
E-8305
UNSUPPORTED FILE FORMAT
Music files that cannot be played normally
are loaded.
Format is wrong.dReplace with music files in the proper format.
E-9101
MECHANICAL TIMEOUT
Mechanical error (time out) during loading
or ejecting of disc.
Displayed when mechanism operation is not completed within the speci-
fied time.
Block Diagram
Trim
BPM
Detect
BPM
Detect
HOT
CUE
HOT
CUE
SAMPLER
SAMPLER
CH2 CD
CH1 CD
USB
CH2 LINE/PHONE
MASTER
OUT
MIC
PC
MASTER
AUX
H.P
MASTER
H.P
CUE 1
H.P
CUE 2
PC
PHONES
3 Band
Isolator
3 Band
Isolator
Beat FX
(ROLL)
Beat FX
(ROLL)
AUX LEVEL
MIC LEVEL EQ
Beat FX
Master
LEVEL
Booth
Monitor
H.P
LEVEL
Level
Meter
Sound
Color FX
Sound
Color FX
(NOISE)
Sound
Color FX
(NOISE)
Trim Beat FX
Sound
Color FX
CH
Fader
CH
Fader
Beat FX
(ECHO)
Beat FX
(ECHO)
Cross
Fader
Master
Mix
HEAD
PHONES
Mix
BOOTH
OUT
PHONES
OUT
LEVEL
METER
LEVEL
METER
H.P
CUE 1
H.P
CUE 2
PC
MASTER
OUT
H.P
MASTER
PC
AUDIO
PC DECK B
PC DECK A
MIXER MODE
“PC”
MIXER
MODE
“XDJ-R1”
CH1 LINE/PHONE