Filter
Top Products
21
In the Tone screen you can select the tones that make up the kit.
* The
Mute Switch
in this screen is linked with the
Mute Sw
(p. 27)
of the Tone/
Output
screen.
* The Comp
Switch
in this screen is linked with the
Comp Sw
(p. 26)
of the Tone/ Comp/EQ screen.
When the Tone screen is displayed, you can switch the Current
Tone by playing a key.
Selecting a Tone (Tone screen)
Parameter Value Description
Current Tone
Tone 01 –
Tone 24
Indicates the tone number of the cur-
rently displayed tone. To select a
tone, change this value.
Inst Type
KICK, SNARE,
TOM, HIHAT, RIDE,
CYMBAL, OTHER,
E.KICK, E.SNARE,
E.TOM,
E.HIHAT, E.RIDE,
E.CYMBAL,
E.OTHER
Selects the type of instrument.
Inst Number
(Depends on the
“Inst Type”)
Selects a variation of the instrument.
Fader Group 1–8 Assigns the tone to a fader group.
Layer Tone
OFF, Tone 01 –
Tone 24
If you want the current tone to sound
simultaneously with another tone,
specify the number of that tone.
Mute Group 0(OFF), 1–24
If there is a combination of tones that
should not sound simultaneously,
such as an open hi-hat sound and a
closed hi-hat sound, set the Mute
Group parameter of those tones to
the same number.
Mute Group is a function that pre-
vents tones of the same setting from
being heard together. If you don’t
want to use this function, set this to 0.
Assign Type MULTI, SINGLE
This specifies how the tone will sound
when played repeatedly.
MULTI
: The same tone will be sound-
ed on top of the already-sounding
tone. If you repeatedly play a slow-
decaying sound such as a cymbal,
the new note will not silence the pre-
vious note.
SINGLE
: The currently sounding
note will be silenced before the new
note is played.
Parameter Value Description
ARX-01_e.book 21 ページ ２００８年２月１９日 火曜日 午後４時７分