Filter
Top Products
27
Volume adjustment
(Tone/Output screen)
fig.signal-flow.eps
Here you can make settings related to the output of each tone.
Signal Flow
Reverb Send Level
Inst
Pan
Input
Level
COMP/EQ
Tone
Level
Output
Level
Output
Assign
DRY
MFX
to Reverb
to MF
X
to Mixe
r
Parameter Value Description
Pan
L64 –0 –63R
Adjusts the pan of the tone. “L64”
places the sound at far left, “0” at
the center, and “63R” at the far
right.
Tone Level 0–127
Specifies the volume of the tone.
You’ll use this parameter mainly to
adjust the volume balance relative
to the other tones.
Output Level 0–127
Specifies the signal level of each
tone.
Output Assign DRY, MFX
Selects whether each tone will out-
put its original sound or will use
MFX.
DRY
: The original sound will be
output without processing.
MFX
: The sound will be sent
through the multi-effect before be-
ing output.
Reverb Send
Level
0–127
Specifies the level of the signal sent
from each tone to reverb.
Mute Sw ON/OFF Turns muting on/off for each tone.
ARX-01_e.book 27 ページ ２００８年２月１９日 火曜日 午後４時７分