Filter
Top Products
61
41: TRIPLE TAP DELAY
Produces three delay sounds; center, left and right.
fig.MFX41
42: QUADRUPLE TAP DELAY
This effect has four delays.
fig.MFX42a
Stereo location of each delay
fig.MFX42b
Parameter
Value Description
Left #1
Center #2
Right #3
0–4000 ms,
note
Adjusts the time until the delay sound is
heard.
Feedback #4 -98– +98 %
Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-
) settings invert the phase.
HF Damp
200–8000
Hz, BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high frequen-
cies, set this parameter to BYPASS.
Left/Right/
Center
Level
0–127
Volume of each delay
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output level
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance D
Balance W
Balance D
Feedback
Center Tap
Parameter
Value Description
Delay 1–4
#1–#4
0–4000 ms,
note
Adjusts the time until the delay sound is
heard.
Level 1–4 0–127 Volume of each delay
Feedback -98– +98 %
Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-
) settings invert the phase.
L in
R in
L out
R out
Quadruple Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback
1
23
4
L
R
ARX-01_e.book 61 ページ ２００８年２月１９日 火曜日 午後４時７分