Filter
Top Products
47
21: STEREO FLANGER
This is a stereo flanger. It produces a metallic resonance that rises and falls
somewhat like a jet airplane taking off or landing. A filter is provided so
that you can adjust the timbre of the flanged sound.
fig.MFX21
Parameter
Value Description
Filter Type
OFF, LPF,
HPF
Type of filter
OFF:
no filter is used
LPF:
cuts the frequency range above the
Cutoff Freq
HPF:
cuts the frequency range below the
Cutoff Freq
Cutoff Freq
200–8000
Hz
Basic frequency of the filter
Pre Delay
0.0–100.0
ms
Adjusts the time until the flanger sound is
heard.
Rate #1
0.05-10.00
Hz, note
Frequency of modulation
Depth #2 0–127 Depth of modulation
Phase 0–180 deg Spatial spread of the sound
Feedback #3 -98– +98 %
Adjusts the amount of the flanger sound
that’s fed back into the effect. Negative (-
) settings invert the phase.
R in
R out
L in
L out
Flanger
Feedback
Feedback
Flanger
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Low Gain
-15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance #4
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the flanger sound (W)
Level 0–127 Output level
Parameter
Value Description
ARX-01_e.book 47 ページ ２００８年２月１９日 火曜日 午後４時７分