Filter
Top Products
26
Volume change and tone adjustments
(Tone/Comp/EQ screen)
fig.02-003.eps
Here you can adjust the compressor and equalizer for each tone.
* The Tone Level in this screen is linked with the Tone Level param-
eter of the Tone/
Output
screen (p. 27).
Compressor
This reduces high levels and boosts low levels, making the overall
volume more consistent.
Compressor-related parameters
EQ-related parameters
Parameter
Value Description
Comp Sw
ON/OFF
Compressor on/off
Input Level 0–127
Volume level that is input to the compres-
sor
Attack 0.05–50.0 ms
Time from when the input exceeds the
threshold until compression begins
Release 0.05–200 ms
Time from when the input falls below the
threshold until compression is turned off
Output Gain 0–+24 dB Level of the output sound
Threshold 0–127 Level above which compression is applied
Ratio 1:1–
∞
:1 Compression ratio
Parameter
Value Description
Low Freq 50–400 Hz Frequency of the low range
Low Gain -15–+15 dB Gain of the low frequency range
High Freq
2000–
16000 Hz
Frequency of the high range
High Gain -15–+15 dB Gain of the high frequency range
ARX-01_e.book 26 ページ ２００８年２月１９日 火曜日 午後４時７分