Filter
Top Products
Panel Descriptions
20
Rear Panel Connections
FOOT PEDAL jacks
USB COMPUTER connector
With a USB cable, you can connect
the JUPITER-80 to your computer
(p. 90).
NOTE
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn o the power on all devices before
making any connections.
DIGITAL AUDIO OUT (COAXIAL) jack
Connect this to speakers or other devices that are
equipped with a digital input.
This jack outputs the same audio signal as the MAIN
OUT jacks.
Hold jack
Here you can connect a pedal
switch (such as one from the DP
series; sold separately) and use it
as a Hold pedal (p. 48).
CTRL 1, CTRL 2 jacks
Here you can connect an expression pedal (EV-5; sold
separately) and use it to control various parameters or
functions (p. 48).
* Use only the specied expression pedal (EV-5; sold
separately). By connecting any other expression
pedals, you risk causing malfunction and/or
damage to the unit.
AC IN jack
Connect the included AC cord
here.
[POWER] switch
This turns the power on/o (“Turning
the Power On” (p. 23).
MIDI connectors
For connecting MIDI device
(p. 91).