Roland JUPITER-80 Electronic Keyboard User Manual


 
72
Using the USB Memory Song Player/Recorder
The USB Memory Song Player/Recorder lets you
play back audio les (WAV, MP3, AIFF) that you’ve
copied from your computer to a USB ash drive,
or to record your keyboard performance to a USB
ash drive.
NOTE
• Never insert or remove a USB ash drive while this unit’s power
is on. Doing so may corrupt the unit’s data or the data on the
USB ash drive.
• Carefully insert the USB ash drive all the way in-until it is rmly
in place.
• Use USB ash drive available from Roland. Proper operation
cannot be guaranteed if other USB device is used.
• Don’t connect anything other than a USB ash drive to the USB
MEMORY connector.
MEMO
If the USB ash drive contains a large number of song les, it
may take some time for them to be read.
Basic Operations in the Song Screen
The Song screen (p. 34) will appear when you press the [SONG]
button.
In the Song screen you can select the audio le to play back, and
make settings for playback.
Audio les are listed
here.
Turn chain play
on/o.
Adjust the
volume of the
song player.
Turn loop play on/o,
and make settings for
it (p. 74).
Turn center cancel
on/o, and make
settings for it (p. 73).
Set the playback
speed and pitch
(p. 73).
Indicates the
current time of the
audio le.
MEMO
Copy your audio les (WAV, MP3, AIFF) to the root folder (the top
level) of your USB ash drive, or create a folder on your USB ash
drive and copy the les into it. For more about folders in USB
ash drive, refer to “USB Flash Drive” (p. 17).
Playback
Here’s how to play back audio les saved on the USB ash drive.
1. Press the [SONG] button.
The Song screen will appear. A list of the audio les on the USB ash
drive will appear.
MEMO
If the le name or folder name contains double-byte characters
(e.g., Japanese), they will not be shown correctly in the display.
2. Select an audio le.
Touch the audio le that you want to play.
MEMO
• To view the les within a folder, select that folder and touch it or
press the [ENTER] button.
• The currently shown folder is indicated by the orange text at
the top of the list. To return to the higher-level folder, touch the
folder button located at the left of the current folder. To return
to the root folder (the top level), touch </>.
Currently shown folder
(orange text)
Upper-level folder
</> is the root folder
Folder
3. Press the [
] (PLAY) button.
The selected audio le will play.
• Press the [
] (STOP) button to stop playback.
When you press the [
] (PLAY) button once again, playback
will resume from where it was stopped.
• Press the [
] button to return to the beginning of the audio
le.
• Rewinds the audio le while you hold down the [
] button.
• Fast-forwards the audio le while you hold down the [
]
button.