Filter
Top Products
Using the USB Memory Song Player/Recorder
73
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Audio les that can be played
MP3
Format MPEG-1 audio layer 3
Sampling Frequency 44.1 kHz
Bit Rate
32k, 40k, 48k, 56k, 64k, 80k, 96k, 112k,
128k, 160k, 192k, 224k, 256k, 320 kbps /
VBR (Variable Bit Rate)
WAV, AIFF
Sampling Frequency 44.1 kHz, 48 kHz, 96 kHz
Bit Rate 8, 16, 24-bit
Minimizing Sounds in the Center (Center
Cancel)
You can minimize the sounds heard from the center of the playback
(e.g., vocals).
1. In the Song screen (p. 34), touch <Center Cancel>.
The Center Cancel function will turn on (the button will light).
Now you can make center cancel settings.
Parameter Value Explanation
Center Cancel
Type
MID-HI
Minimizes mid-frequency and high-
frequency sounds localized in the center.
LOW
Minimizes low-frequency sounds localized
in the center.
ALL Minimizes all sounds localized in the center.
2. To turn o the Center Cancel function, touch <Center
Cancel> once again.
The Center Cancel function will turn o (the button will be unlit).
Changing the Playback Speed or Pitch
You can change the speed or pitch at which an audio le plays back.
1. In the Song screen (p. 34), change the Play Speed or the Play
Pitch.
Parameter Value Explanation
Play Speed 75–125 [%] Changes the speed of playback.
Play Pitch 30–170 [%] Changes the pitch of playback.
Adjusting the Balance of Frequency
Ranges (Equalizer)
The USB memory song player provides a four-band equalizer. You
can apply an equalizer to the audio le playback and to the sound
being input via the AUDIO IN jack.
1. In the MENU screen (p. 34), touch <System>.
2. Touch <SETUP>, and then touch <Song EQ>.
The Song EQ screen will appear.
Now you can make equalizer settings.
Parameter Value Explanation
Sw OFF, ON Turns the equalizer on/o.
Low Freq
200, 400
[Hz]
Species the fundamental frequency of the
low range.
Low Gain
-15–+15
[dB]
Adjusts the amount of low range boost/cut.
Mid1 Freq
200–8000
[Hz]
Species the fundamental frequency of the
mid range 1.
Mid1 Gain
-15–+15
[dB]
Adjusts the amount of mid range 1 boost/
cut.
Mid1 Q
0.5, 1.0, 2.0,
4.0, 8.0
Species the width of the mid range 1.
Higher values make the width narrower.
Mid2 Freq
200–8000
[Hz]
Species the fundamental frequency of the
mid range 2.
Mid2 Gain
-15–+15
[dB]
Adjusts the amount of mid range 2 boost/
cut.
Mid2 Q
0.5, 1.0, 2.0,
4.0, 8.0
Species the width of the mid range 2.
Higher values make the width narrower.
High Freq
2000, 4000,
8000 [Hz]
Species the fundamental frequency of the
high range.
High Gain
-15–+15
[dB]
Adjusts the amount of high range boost/
cut.
Level 0–127 Adjusts the output volume.
3. To save the settings, touch <SYSTEM WRITE>.