Filter
Top Products
Turning the Power On
23
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Once the connections have been completed (p. 20), turn on power to your various devices in the order specied. By turning on devices in the wrong
order, you risk causing malfunction and/or damage to speakers and other devices.
Turning the Power On
* Before switching the power on/o, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound
when switching the power on/o (p. 5). However, this is normal and does not indicate a malfunction.
1. Minimize the volume of the JUPITER-80 and your speakers.
2. On the JUPITER-80’s rear panel, turn the [POWER] switch ON.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
3. Turn on the power of your speakers.
4. Use the [VOLUME] knob to adjust the volume appropriately.
Turning the Power O
1. Minimize the volume of the JUPITER-80 and your speakers.
2. Turn o the power of your speakers.
3. Turn the JUPITER-80’s [POWER] switch OFF.
If you need to turn o the power completely, rst turn o the POWER switch, then unplug the power cord from the “Power Supply” (p. 5).
Turning the Power On