Filter
Top Products
11
Names of things and what they do
11.DECIMAL Button
When not in PLAY mode, sets the input mode to decimal (DECIMAL input mode).
12.Controllers [B1]–[B6]
You can assign MIDI messages to these controllers.
13.Display
Indicates the current status and various other information.
14.Controllers [S1]–[S8]
You can assign MIDI messages to these controllers.
15.Controllers [L1]–[L3]
You can assign MIDI messages to these
controllers.
16.TRANSPOSE/ENTER Button
Use [TRANSPOSE] + [OCTAVE -/+] to
transpose the pitch of the keyboard in semitone
steps. Also, in any mode except PLAY mode,
it functions as the [ENTER] button, which
you need to press to confirm the settings
you've made.
17.OCTAVE -/+
Press [OCTAVE -/+] to shift the pitch of the
keyboard up or down in steps of an octave.
When not in PLAY mode, use these buttons to
return to the previous setting item (the [BACK]
button) or to cancel the setting and return to
PLAY mode (the [CANCEL] button).
18.BENDER Lever
This lever can be used to modify the pitch
or apply vibrato.
USB Lights if the PCR-30/50/80 is connected to your computer via USB.
DATA OUT This will blink when MIDI messages are transmitted via USB or MIDI OUT.
HEX Lights when the value shown in the display is hexadecimal.
fig.panelB_50
13
14
fig.panelC_50
16
15
18
17