Roland PCR-80 Musical Instrument User Manual


 
131
Edit mode (EDIT)
Aftertouch Assign upper/lower limit and port settings
In the case of Aftertouch Assign 1 or 3, you can set the upper limit and lower limit of the value, and
specify the port.
fig.max
1. The following display will appear.
*1 Reference
2. Use the [DEC][INC] buttons or the [0][F] keys to specify the upper limit.
3. Press the [ENTER] button.
fig.min
The following display will appear.
*1 Reference
4. Use the [DEC][INC] buttons or the [0][F] keys to specify the lower limit.
5. Press the [ENTER] button.
fig.p1
The display will indicate “P--”.
*1 Reference
6. Specify the output port. (“Specifying the port” (p. 159))
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.