Filter
Top Products
119
Basic operation
Program Change mode (PROGRAM CHANGE)
This mode lets you transmit a program change message on the current channel.
fig.PC-1_80
1
Press the [PROGRAM CHANGE] button.
The [PROGRAM CHANGE] button will light. The display will indicate the program change that
was transmitted most recently.
* The [HEX] or [DECIMAL] button will also light according to the input mode (p. 158).
2
Use the [DEC][INC] buttons or the [0]–[F] keys of the keyboard to specify the
program change you want to transmit.
3
Press the [ENTER] button.
The setting will be cancelled if you press another button instead of the [ENTER] button.
The program change has now been transmitted.
DEC Change the current value by -1
INC Change the current value by +1
0–F
The input value
HEX...00–7F
DECIMAL...1–128
1
2
3