Roland PCR-80 Musical Instrument User Manual


 
16
Installing & Setting Up the Driver (Windows)
13
The Found New Hardware Wizard will appear.
Make sure that the screen indicates “EDIROL PCR”, select“Install from a list
or specific location (Advanced)”, and click [Next].
fig.2-7
14
The screen will indicate “Please
choose your search and
installation options”.
Select “Don’t search. I will
choose the driver to install”,
and click [Next].
15
Make sure that the “Model” field indicates “EDIROL PCR”, and click
[Next]. Driver installation will begin.
fig.2-9_30
16
The Insert Disk dialog box will appear.
Click [OK].
17
The Files Needed dialog box will appear.
Input the following into the “Copy files from” field, and click [OK].
D:\Driver\USB_XP2K
* The drive name “D:” may be different for your system. Specify the drive name of your
CD-ROM drive.
If the “What action do you want Windows to take?” setting was not set to “Ignore”,
a “Hardware Installation” dialog box will appear.
If “What action do you want Windows to take?” is set to “Warn”
1. Click [Continue Anyway].
2. Continue the installation.
If “What action do you want Windows to take?” is set to “Block”
1. Click [OK].
2. When the “Found New Hardware Wizard” appears, click [Finish].
3. Perform the installation as described in the “Troubleshooting” section on Device Manager
shows “?”, “!”, or “USB Composite Device” (p. 172).
The Insert Disk dialog
may not appear. In that
case, proceed to step 17.