Roland PCR-80 Musical Instrument User Manual


 
142
Edit mode (EDIT)
13
In the case of Advanced mode 4, specify the upper and lower limits.
14
Specify the output port. (“Specifying the port” (p. 159))
15
If you are making an assignment for a button, specify the button mode. (“Specifying the
button mode” (p. 158))
Here are some examples of inputting various actual system exclusive messages.
GM2 System On
F0 7E 7F 09 03 F7
Here’s how to assign a GM2 System On system exclusive message in Basic mode.
1. Press the [EDIT] button.
The display will indicate “EDT”.
2. Slightly move the controller to which you want to assign the system exclusive
message. In the case of a button, press that button.
The display will indicate the number of the selected controller.
3. Confirm what’s indicated, and press the [ENTER] button.
4. Press the [SYSTEM Ex.] key.
The display will indicate “SE0”.
5. Confirm what’s indicated, and press the [ENTER] button.
The display will indicate “F0”, which is the first byte (beginning status) of a system exclusive
message. This cannot be changed. (This cannot be changed.)
6. Confirm what’s indicated, and press the [ENTER] button.
7. Use the [7] and [E] keys to input the second byte “7E”.
8. Confirm what’s indicated, and press the [ENTER] button.
9. Use the [7] and [F] keys to input the third byte “7F”.
10.Confirm what’s indicated, and press the [ENTER] button.
Input the fourth and fifth bytes in the same way.
11.Finally, use the [F] and [7] keys to input the ending status byte “F7”.
12.Confirm what’s indicated, and press the [ENTER] button.
13.Specify the output port. (“Specifying the port” (p. 159))
14.If you are making an assignment for a button, specify the button mode.
(“Specifying the button mode” (p. 158))
The GM2 System On message has now been assigned.