Filter
Top Products
162
Convenient functions
■ Inputting channel/block data
If a system exclusive message includes a channel or GS block number, here’s how to specify the
type and the value of the upper bits. For the channel and block number, the setting of the current
channel (p. 118) will be inserted as the lower bits. (The block number is not actually a channel, but
corresponds to the “part” within a GS sound module. On the PCR-30/50/80, this corresponds to
the channel for the sake of convenience.)
For an actual example, refer to “Bend Pitch Control” (p. 144) in the section on the Edit Mode.
1. Press the [DATA] key several times at the location where you want to input the channel/block
number, to select “0CH” for the channel or “0BL” for the block.
fig.csbl
2. Use the [0]–[7] keys to input the value of the upper four bits.
The “0” in the display will change to the numerical value that you input.
3. Press the [ENTER] button.
Current
channel
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CH 0 1 2 3 4 5 6 7 8 9 A B C D E F
BL 1 2 3 4 5 6 7 8 9 0 A B C D E F
[DATA ]
[DATA ]
[DATA ]
[DATA ]