Filter
Top Products
115
Chapter 3 Selecting Output Jacks
Chap.3
MFX Chorus Send Level
Range: 0–127
Determines the level of the post-Multi-effects processor
signal sent to Chorus. Its final output destination is
determined by the Chorus output setting.
MFX Reverb Send Level
Range: 0–127
Determines the level of the post-Multi-effects processor
signal sent to Reverb. Its final output destination is
determined by the Reverb output setting.
Chorus Output Select
Specifies how the signal routed through Chorus will be
output.
Available Settings:
MAIN: The Chorus output is sent only to the OUTPUT jacks.
REV: The Chorus output is sent only to the Reverb.
M+R: The Chorus output is sent to the OUTPUT jacks and to
the Reverb.
Chorus Level
Range: 0–127
Determines the Chorus output level.
Reverb Level
Range: 0–127
Determines the Reverb output level.
MFX Output Assign
Range: A–D
Selects the pair of OUTPUT jacks to which the Multi-effects
stereo output is routed.
* As the Multi-effects are in stereo, settings for the
INDIVIDUAL OUTPUT jacks are unavailable.
Chorus Output Assign
Range: A–D
Selects the pair of OUTPUT jacks to which the Chorus unit’s
stereo output is routed when Chorus Output Select is set to
“MAIN” or “M+R.” The output destination setting for the
signal sent to Reverb is determined according to the Reverb
settings.
* As the internal effects processors are in stereo, settings for the
INDIVIDUAL OUTPUT jacks are unavailable.
Reverb Output Assign
Range: A–D
Selects the OUTPUT jacks to which the Reverb unit’s stereo
output is routed.
* As the internal effects devices are in stereo, you cannot make
the settings for the INDIVIDUAL OUTPUT jacks.
RHYTHM Common page ([RHYTHM] -
[F1 (Common)])
Common
Level (Rhythm Level)
Range: 0–127
Sets the volume of the Rhythm Set.
* You can specify the level for each Rhythm Tone using the Tone
Level parameter (p. 177).
Output Assign (Rhythm Set Output Assign)
Available Settings:
MFX: The Tone is sent into the Multi-effects. Its output
destination is determined by the Multi-effects output
settings.
OUTPUT A–D: The Rhythm Tone is sent to the selected
OUTPUT A–D jacks.
INDIV 1–8: The Tone is sent to the INDIVIDUAL OUTPUT
jacks 1–8.
TONE: Outputs according to the settings for each Rhythm
Tone.