Filter
Top Products
187
Chapter 7 Loading a Variety of Data
Chap.7
About Each Sampler Library
Folder Type (Display)
In the case of the S-700 series
<Volume>: This indicates Volume folders.
<Performance>:This indicates Performance folders.
<Patch>: This indicates Patch folders.
<Partial>: This indicates Partial folders.
<Sample>: This indicates Sample folders.
When Loading Libraries for the AKAI
S1000/3000
<Partition A-?>:This indicates Partition folders.
<Volume>: This indicates Volume folders. Actually, the
name may be set as desired. Check the reference material
included with the CD-ROM to be loaded.
* Program files are loaded to the User Area as Patches. When
files are displayed, as when shown in the File Select screen, the
extension “.AKP” is added. In addition, sample files are loaded
to SIMMs. When these files are displayed, as when shown in
the File Select screen, the extension “.AKS” is added.
When Loading AIFF/WAV Libraries
The folder display and level varies according to the library
(CD-ROM) type.
Check the reference material included with the CD-ROM to
be loaded.
Procedure for Deleting a Patch or Performance
After selecting “No” in Step 12 of “Loading Sampler
Libraries,” press [F4 (JumpDel)] to display the Delete
screen.
fig.07-01.e_65
1. Turn the VALUE dial or press [ ] or [ ] to select
the Patch or Performance to be deleted, then press
[F5 (Mark)]. To place a marker on all Patches and
Performances, press [F4 (Mk All)]. Press this once
more to remove all markers.
2. Press [F6 (Delete)] to delete the selected Patch or
Performance.
* To cancel the operation, press [EXIT].
* When a Patch is deleted, the Partials and samples used in
that Patch are deleted simultaneously. However, Partials
and samples are not deleted when they are also being used
in another Patch.
By pressing [F3 (View)], you can specify the category of
patches to be displayed.
When the View Switch window appears, turn the
VALUE dial or press [ ] or [ ] to select the category
to be displayed, then press [F5 (On/Off)]. To place a
marker on all categories, press [F4 (All)]. Press this once
more to remove all markers. And then press [F6 (OK)] to
finalize the category.
* Partials and samples can also be deleted in much the same
way as Patches—simply move the cursor to Type and
select the type to delete.
* You can also display the Delete screen by pressing
[SYSTEM/UTILITY], causing the indicator to flash, then
pressing [F4 (Delete)].