Filter
Top Products
211
Chapter 9 Other Settings/Status Checks
Chap.9
Making the Equalizer
Settings ([SYSTEM/UTILITY] -
[F2 (Outp&EQ)] - [F2 (EQ)])
You can set the equalization for each of the output jacks.
* ON and OFF are applied to all of the equalizers as a group. (p.
24)
fig.09-003.e_70
Output-A (1/2)–D (7/8)
L.F (Low Frequency)
Range: 200/400 Hz
Selects the frequency of the low range.
L.G (Low Gain)
Range: -15– +15
Specifies the low-frequency gain (amount of boost or cut).
Positive (+) settings will emphasize the low-frequency range.
H.F (High Frequency)
Range: 2000/4000/8000 Hz
Selects the frequency of the high range.
H.G (High Gain)
Range: -15– +15
Specifies the high-frequency gain (amount of boost or cut).
Positive (+) settings will emphasize the high-frequency
range.
Setting Procedure:
1. Press [SYSTEM/UTILITY], and confirm that its indicator
has lighted.
* If the indicator is blinking, you are in UTILITY mode. Press
[SYSTEM/UTILITY] once again to get the indicator to light
steadily.
2. Press [F2 (Outp&EQ)] to call up the SYSTEM EQ page.
3. Press [ ]/[ ]/[ ]/[ ] to move the cursor to
the parameter you want to set.
4. Turn the VALUE dial or by press [INC]/[DEC] to select
the desired value.
* If you’ve made a mistake, simply press [UNDO]. The value of
the parameter will be restored to what it was when you first
positioned the cursor there.
5. Press [EXIT] to return to the applicable PLAY page.
Establishing the MIDI
Settings ([SYSTEM/UTILITY] -
[F3 (MIDI)])
fig.09-004.e_70
Setting Procedure:
1. Press [SYSTEM/UTILITY], and confirm that its indicator
has lighted.
* If the indicator is blinking, you are in UTILITY mode. Press
[SYSTEM/UTILITY] once again to get the indicator to light
steadily.
2. Press [F3 (MIDI)] to call up the SYSTEM MIDI page.
3. Press [ ]/[ ]/[ ]/[ ] to move the cursor to
the parameter you want to set.
4. Turn the VALUE dial or by press [INC]/[DEC], to select
the desired value.
* If you’ve made a mistake, simply press [UNDO]. The value of
the parameter will be restored to what it was when you first
positioned the cursor there.
5. Press [EXIT] to return to the applicable PLAY page.