Filter
Top Products
53
Chapter 2 Using the XV-5080 Effects
Chap.2
frequencies of the feedback, set this parameter to BYPASS.
Feedback #
Adjust the proportion (%) of the delay sound that is fed back
into the effect. Negative (-) settings will invert the phase.
FBK Mode (Feedback Mode)
Select the way in which delay sound is fed back into the
effect.
NORMAL:The left delay sound will be fed back into the left
delay, and the right delay sound into the right delay.
CROSS:The left delay sound will be fed back into the right
delay, and the right delay sound into the left delay.
Phase
Phase Left
Select the phase of the left delay sound.
NORMAL:Phase is not changed.
INVERT:Phase is inverted.
Phase Right
Select the phase of the right delay sound.
NORMAL:Phase is not changed.
INVERT:Phase is inverted.
EQ Gain
Low (LowGain)
Adjust the gain of the low frequency range.
High (High Gain)
Adjust the gain of the high frequency range.
Balance
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
delay sound. With a setting of D100:0W only the direct
sound will be output, and with a setting of D0:100W only the
delay sound will be output.
Output
Level (Output Level)
Adjust the output level.
18: MODULATION DELAY
This effect adds modulation to the delayed sound, producing
an effect similar to a flanger.
When Feedback Mode is NORMAL:
fig.2-22
When Feedback Mode is CROSS:
fig.2-23
Delay
Left (Delay Time Left)
Adjust the time from the original sound until when the left
delay sound is heard.
Right (Delay Time Right)
Adjust the time from the original sound until when the right
delay sound is heard.
HF Damp
Adjust the frequency above which sound fed back to the
effect will be cut. If you do not want to cut the high
frequencies of the feedback, set this parameter to BYPASS.
Feedback (Feedback Level)
Adjust the proportion (%) of the delay sound that is fed back
into the effect. Negative (-) settings will invert the phase.
FBK Mode (Feedback Mode)
Select the way in which delay sound is fed back into the
effect.
NORMAL:The left delay sound will be fed back into the left
delay, and the right delay sound into the right delay.
CROSS:The left delay sound will be fed back into the right
delay, and the right delay sound into the left delay.
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation