Filter
Top Products
24
Monitoring the SI-24’s inputs
Returning the input sound from your application
software
This allows monitoring only for the input sounds that are set to record mode in your
application software. The sound will be delayed by the latency specified in the
RPC-1 control panel, but you will be able to monitor the sound processed by the
software effects.
1. Open the RPC-1 control panel.
2. Click the “Hardware Settings” tab.
3. ● Windows 98/ME
Check “Disable audio app use of Monitor Mixer and Patchbay/Router.”
fig.M05
● Windows 2000/XP
Check “Disable Control of the Monitor Mixer and Patchbay/Router by Audio
Applications.”
fig.M10.
4. Make the following settings according to the application you are using.
For details, refer to the manual for your application.
● Logic RPC Pro/Logic 5 users:
Audio ➔ Audio Hardware&Drivers
Check “Software Monitoring” if you are using ASIO or EASI drivers.
fig.M12
● Cubase users:
Options ➔ Audio Setup ➔ System
• Uncheck “ASIO Direct Monitoring.”
• Check “Record Enable Type.”
fig.M11
For details on operation, refer
to the column “How to open
the RPC-1 control panel”
(p. 20).