Filter
Top Products
41
Controlling Pro Tools (version 4.1 or later)
Controlling Pro Tools
■ EQ/SEND (Equalizer/Send) buttons
You can press [EQ/SEND] to turn it on (lit), and use SEND 1–4 (PAN 9–12) to control
the send levels of the channel you selected in [CH SELECT].
■ PLUG-IN button
When you press [PLUG-IN] to turn it on (lit), you will be able to control plug-in
effects.
Use the following procedure to control plug-in effects.
1. Press [PLUG-IN] to turn it on (lit).
The plug-in window will appear.
2. Use [CH SELECT] to select the track into which the plug-in you want to control
has been inserted.
3. Use [INS 1] (ON 1)–[INS 4] (ON 4) to select the slot into which the plug-in you
want to control has been inserted.
4. Use PARAM 1–4 (PAN 9–12) and [ON 1–4] (CH SELECT 9–12) to control the
parameters of the plug-in.
5. Use [< SCROLL] (STATUS 11) or [SCROLL >] (STATUS 12) to change the range
of parameters being controlled. Knobs or buttons within the region of
parameters being controlled will be displayed in blue.
■
MARKER button
When you press [MARKER] to turn it on (lit), [0] will function as the marker request
button. Markers will be registered to [1]–[9], and you can press one of these buttons
to move to the registered location.
■
SHORTCUT button
When you press [SHORTCUT] to turn it on (lit), [0]–[9] will execute the following
Pro Tools commands.
[1]: Save [2]: Undo [3]: Copy [4]: Paste [5]: Clear
[6]: Group [7]: Create Group [8]: Fine [9]: Escape [0]: Enter
■
SCREEN SET button
When you press [SCREEN SET] to turn it on (lit), [1]–[6] will open the Pro Tools
window assigned to each button.
[1]: Mix [2]: Edit [3]: Transport
[4]: Memory Locations [5]: Status [6]: Plug-in
■
Transport
You can use [STOP], [PLAY], [REC], [ZERO RETURN] (PAUSE), [REW], and [FF]
to operate the Pro Tools transport.
You can use the jog dial to move the song position line.
If you want to view the send
levels in the screen, choose the
Display menu in Pro Tools,
and in “Sends View Shows,”
select Send A–D as desired.
[7] (Create Group) groups the
tracks that you selected by
simultaneously pressing two
or more [CH SELECT]
b
uttons. [6] (Group) turns the
group function on/off. While
you hold down [8] (Fine), you
will be able to adjust the pan or
send level more precisely.