Filter
Top Products
33
Controlling Logic RPC Pro
Controlling Logic RPC Pro
Switching the status of a channel
The function of [STATUS] will change depending on the STATUS MODE.
1. As described in the preceding section “Selecting channels,” select the Logic RPC
Pro mixer section that you want to control.
2. Select STATUS MODE, and press [STATUS] to switch the status of the channel.
The functions of STATUS MODE and [STATUS] correspond as follows.
STATUS MODE [STATUS] function
[MUTE] Switches muting on/off for each channel.
Lit: Mute on
Dark: Mute off
[SOLO] Switches solo on/off for each channel.
Lit: Solo on
Dark: Solo off
[REC/PLAY]
(Recording/Play)
Switches the record/playback status of each track.
Dark: The track can be played.
Lit red: Now recording.
Blinking red: Selected as a recording destination.
Record mode (lit red) will be selected when you press
[REC].
[AUTOMIX] Switches the Automix Mode status of each channel.
Lit green: Read automix (Read).
Lit red: Write automix (Write).
Lit orange: Automix will be overwritten from the moment
you operate the SI-24 (Latch).
Dark: Automix off (Off).
When you are writing auto-
mix data on Latch mode, it is
convenient to press [SHIFT] to
stop the movement of faders.