Roland SI-24 Musical Instrument User Manual


 
44
Controlling Cubase VST (version 5.0 or later)
How the SI-24 controls will function
Faders 1–12
These will control the Cubase faders.
The CH ASSIGN (Channel Assign) settings correspond as follows to the faders that
will be controlled.
[INPUT]: VST instrument mixer
[OUTPUT]: VST master mixer
[BUS]: VST channel mixer 2 (group mixer 1–8)
[Tr 1-12]: VST channel mixer channels 1–12
[Tr 13-24]: VST channel mixer channels 13–24
STATUS buttons
These buttons will switch the status of the channel according to the selected STATUS
MODE. The current status is shown by the color of the buttons.
CH SELECT (Channel Select) buttons
These buttons select the target channel when controlling the equalizer or send level.
The [CH SELECT] of the target channel will light.
PAN 1–12 knobs
Adjust the channel pan.
EQ/SEND (Equalizer/Send) button
When you press [EQ/SEND] to turn it on (lit), you will be able to control the
equalizer and send levels of the channel that is selected by its [CH SELECT].
PAN knobs 1–12 will control the equalizer (EQ GAIN 1–4, EQ FREQ 1–4) and the
send levels (SEND 1–4).
fig.C4
Pressing [EQ/SEND] will not cause the
VST Channel Settings window to appear.
To open the VST Channel Settings
window, click the mouse on the channel
.
STATUS MODE [STATUS] function
[MUTE] Switches muting on/off for each channel.
Lit orange: Mute on
Dark: Mute off
[SOLO] Switches solo on/off for each channel.
Lit red: Solo on
Dark: Solo off