Filter
Top Products
25
Listening to the Demo
Performance
Listening to the Demo Performance
A demo performance needs to be Recovered from CD-ROM of a belonging. Also, the
CD-R/RW drive such as the Roland CD Recorder is necessary to the Recover. For
details please see the leaflet “To Recover the demo performance” of a belonging.
If you are using a VS-2480 that does not have an internal CD-RW drive, you will need a
separately sold CD-RW drive (Roland CD Recorder).
A number of demo performances were placed on the hard disk inside the
VS-2480CD before it left the factory.
How To Load a Demo Song (CD-R Recover)
1. Turn off the power supply of all apparatus.
2. -1. Connect the VS-2480 with the Roland CD Recorder according to
“Connecting the CD-R/RW Drive (p. 82)”
-2. Turn on the power of the Roland CD Recorder.
-3. Insert a attached CD in the Roland CD Recorder.
3. Turn on the power of the VS-2480 (rear panel).
4. Press [PROJECT]. Project list appears.
5. Use the TIME/VALUE dial to move the cursor to the drive in which the
demo CD-ROM is inserted.
6. Press [F6 (LIST)]. “Change Current Drive?” message appears.
7. Press [ENTER/YES]. “Store Current?” message appears.
8. If you wish to save the current project, press [ENTER/YES]. If not, press
[EXIT/NO].
9. Use the TIME/VALUE dial to move the cursor to the demo project that you
wish to recover.
10. Press Page 3 [F2 (Recovr)]. Project
Recover screen appears.
• CD Speed
Select the speed at which data
will be read from a CD-R/RW
disc. This parameter will be
displayed only if a CD-R/RW
drive is selected as the read
source.
• Erase All Projects
Off—if you want to add the project(s) you’re recovering to the list of projects
already on the destination drive.
On—if you want to clear the drive so it contains only your recovered
Using these demo
performance for any
purpose other than
personal enjoyment
without permission of the
copyright owner is
prohibited by law.
In the case of usage, an
optional the Roland CD
Recorder is required in
VS-2480 which do not build
in the CD-RW drive.