Filter
Top Products
78
Add Finishing Touches to Your Project
6. Use the TIME/VALUE dial or SHUTTLE ring to move to the time location
at which you wish to stop writing.
7. Press [2]. The end time of the project will be registered, and the [2]
indicator will light.
■ Deleting an Unwanted Portion At the End of the Project
fig.05-07_50
1. Press [HOME
(DISPLAY)]. Home
Condition will
appear.
2. Press
[PHRASE/REGION]
in TRACK EDIT
several times until
indicator light red.
3. Press [2]. Move to
the time location at
which you wish to
stop writing.
4. Press [IN] in TRACK
EDIT. The start time
of the region to be
erased will be
registered as the edit
start time, and the
[IN] indicator will
light.
5. Hold [SHIFT] and press [PROJECT END (FROM)] in PREVIEW. Move to
the time location to end of project.
6. Press [OUT] in TRACK EDIT. The end time of the region to be erased will
be registered as the edit end time, and the [OUT] indicator will light.
7. Use [][]to move the cursor that you wish to cut the tracks.
8. Press [ENTER/YES].
9. Press [CUT] in TRACK EDIT.
10. When Track Cut is completed, “Done!” dialog will appear, and erase from
in time to out time.
11. Press [HOME (DISPLAY)]. Home Condition screen will appear.
If the locator number
indicators are already lit,
time locations have already
b
een registered. If you wish
to re-register them, hold
down [CLEAR] and press
locator number. The
indicator will go out, and
the locators will be erased.
32
0
/-
56
1
4
987
LOCATOR
PREVIOUS NEXT
SCENE
BANK AUX 7 AUX 8 USER
AUX 4 AUX 5 AUX 6
AUX 1 AUX 2 AUX 3
BANK
MARKER
LOCATOR / MARKER / SCENE
SHUTTLE
ROUTING
EZ
MENU
TRACK EDIT
AUTOMIX RECRESTARTSTORE
ZERO STOP PLAY REC
PROJECT ENDPROJECT TOP
SCRUB
EXT SYNC
TO THRU
FROM
PREVIEW
COPY MOVE INSERT CUT ERASE COMP / EXP.
IMPORT
LOOPA.PUNCH TOOUTIN FROM
WAVE DISP
REDO
UNDO
SHIFT
PROJECT TRACK EFFECT UTILITY
COPY MOVE TRIM IN TRIM OUT DELETE SPLIT NEW
AUTOMIX
YES NO
ENTER
EXIT
REGION
PHRASE
CD
-
RW
MASTERING
AUTOMIX
ZOOM
GRADATION
MIDI DISK
/
TIME / VALUE
/ /
PATCH BAY
SHUT / EJECT
+
+
PA GE F1 F2 F3 F4 F5 F6 HOME
DISPLAY
4
3
1,11
2
5
6
9
8
7
If the locator number
indicators are already lit,
time locations have already
b
een registered. If you wish
to re-register them, hold
down [CLEAR] and press
locator number. The
indicator will go out, and
the locators will be erased.