Filter
Top Products
6
Preparations
2.
Remove the front panel cover from the VS-2480.
fig.01-02_50
3.
With the warning label of the hard disk facing upward, slide it gently into
the installation bay as far as it will go. You can hook the indentation of the
attachment hardware over the protrusion on the chassis of the VS-2480.
fig.01-03_40
4.
After you install the hard disk to the unit you use, please lock it to fix.
Apply a coin, etc. to the lock and turn it clockwise until it clicks and it is
locked correctly.
fig.01-04
5.
Reattach the front panel cover as it originally was.
The hard disk inside the
VS-2480CD cannot be
removed or exchanged.
When transporting the
VS-2480, please pack it in
the original carton and
shock-absorbing material,
or the equivalent. If an
internal IDE hard disk
(HDP35 series) is installed,
reverse the installation
procedure to remove it
from the VS-2480, pack the
hard disk in its own
packing carton for
transport. If the VS-2480 is
transported with the hard
disk installed, project data
may be lost, or the hard
disk itself may be
damaged.
LOCK