Filter
Top Products
28
Listening to the Demo Performance
Playing Back the Demo Performance
fig.02-01_30
1. Press [TR 1-16 (MASTER EDIT)]. [TR 1-16 (MASTER EDIT)] indicator will
light, the channel fader will adjust to the Track Mixer level of channel 1–16.
fig.02-02_50
2. Set the MONITOR knob to the 0 dB position (3 o’clock).
3. Set all channel faders to the 0 dB position.
4. Lower the master fader to the lowest position.
5. Press [PLAY]. The demo performance will play back, and
the playback time, level meters, and the playback state of
each track (play list) will begin moving.
6. Slowly raise the master fader to adjust the volume. The
playback time, level masters, and playback status of each
track (playlist) etc. will be displayed.
fig.02-03
7. To adjust the volume of the
headphones, rotate the PHONES 1 or
the PHONES 2 knob.
8. When you finish demo performance,
press [STOP]. The demo performance will stop.
■ Viewing the Level Meters.
fig.02-04_50
1. Press [HOME (DISPLAY)].
Home Condition screen
will appear.
2. Press [F3 (TR Mix)]. At this time, the level meters will show the volume
level of the playback tracks.
Using these demo
performance for any
purpose other than
personal enjoyment
without permission of the
copyright owner is
prohibited by law.
TRACK STATUS / PHRASE PAD
SOLO
9121
17
2
18
3
19
4
20
5
21
6
22
7
23
8
24
MASTER
(
dB
)
6
4
0
4
8
12
18
24
42
(
dB
)
6
4
0
4
8
12
18
24
42
TO
FROM
13 14 15 1610 11
FX 2FX1 FX 3 FX 4 FX 5 FX 6 FX 7 FX 8
AUX 2
AUX1
MST AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 AUX 8
FX RTN
TR 17
-
24
TR 1
-
16
FADER
MUTE
RTN
PHRASE
REC
PLAY
OFF
TRACK
///
MASTER
EDIT
V. FADER
PAD
/
/
L
R
L
R
1
4,6
3
010
PHONES 2
010
PHONES 1
MONITOR
CONTRAST
7
7
2
If you set the Track Mixer
17–24, press [TR 17-24/FX
RTN (V.FADER)].
AUTOMIX RECRESTARTSTORE
ZERO STOP PLAY REC
SHUT / EJECT
5
8
F1 F2 F3 F4 F5 F6
HOME
DISPLAY
1
23
This switches the type of level meters displayed for the function buttons in home
condition.
[F1 (INPUT)] Levels being input to the input jacks
[F2 (IN Mix)] Levels being input to the input mixer
[F3 (TR Mix)] Track mixer levels
[F4 (AUXDIR)] Signal levels flowing through AUX bus and direct path
[F5 (OUTPUT)] Levels being output to the output jacks