Filter
Top Products
37
Making a Multi-Track Recording
Making a Multi-Track
Recording
fig.QuickRouting
7. Press [F4 (AllClr)].
8. Press [IN 1-16 (SOLO)]. [IN 1-16 (SOLO)] indicator will light, and channel
fader will adjust the Input Mixer channel 1–16.
9. Specify the recorded on which source. Press [SELECT] of the source
channel that you wish to record. For this example, Press Input Mixer
Channel 1 [SELECT].
10. If routing operation is finished, press [F6 (EXIT)] or [HOME (DISPLAY)].
11. Press [TR 1-16 (MASTER EDIT)]. [TR 1-16 (MASTER EDIT)] indicator will
light, channel fader will adjust the Track Mixer channel level 1–16.
12. Raise and lower the channel fader 1 and verify that the volume changes.
The Track Mixer channel fader is used for monitoring. It does not affect the
recording level. You can record even if you hear no sound. Adjust the fader
to a comfortable level for monitoring.
13. Press [REC]. [REC] indicator will blink red.
fig.03-15_50
14. Press [PLAY]. [PLAY] indicator will light green, and recording will begin.
15. When you finish the recording, press [STOP].
16. Press track 1 [TRACK STATUS] several times until light green, or hold
[STOP] and press track 1 [TRACK STATUS].
If you wish to assign the
other source to the
recording track, repeat
press [SELECT] that you
wish to record the source.
In this case that it records
to other tracks the [TRACK
STATUS] is pushed.
AUTOMIX RECRESTARTSTORE
ZERO STOP PLAY REC
SHUT / EJECT
5,13
15,16
14