Filter
Top Products
56
Using Effects
7. As described in “Selecting the effect bus assignment (p. 52),” specify
which AUX bus will be used as the effect bus. Here we will send the AUX1
signal to the Effect 1 (FX 1).
fig.04-08_30
8. Press [CH EDIT] for the track mixer channel whose effect you wish to use.
For this example, press channel 2 [CH EDIT]. Mixer Condition screen will
appear.
9. Output the signal to AUX 1. Use [][][][] to move the
cursor to the AUX1 Send switch, use the TIME/VALUE dial to set the send
switch to a setting other than Off.
10. Use [][][][] to move the cursor to the AUX1 channel
fader, use TIME/VALUE dial to adjust the effect send level. Normally, you
will leave the AUX1 channel fader at the 0 dB position.
11. Press [HOME (DISPLAY)]. Home Condition screen will appear.
12. Press [TR 17-24/FX RTN (V.FADER)]. [TR 17-24/FX RTN (V.FADER)]
indicator will light, channel fader will adjust the Track Mixer channel 17–24
and the Effect 1–8 Return level.
fig.tr-chview
13. Raise and lower the FX1RTN fader.
The effect depth will change. Adjust
to the desired depth.
14. Begin the recording, following the
procedure described in “Recording
On a Track (p. 36) step 11–14.”
15. When you finish recording, press
[STOP].
16. As described in “Playing Back the Demo Performance (p. 28),” record a
performance and then listen to it.
At this time, the sound of
input mixer channel 1 will
no longer be output
directly from master out,
and will be routed through
the track mixer.
TRACK STATUS / PHRASE PAD
IN 1
-
16
SOLO
9121
17
2
18
3
19
4
20
5
21
6
22
7
23
8
24
MASTER
(
dB
)
6
4
0
4
8
12
18
24
42
(
dB
)
6
4
0
4
8
12
18
24
42
TO
FROM
13 14 15 1610 11
FX 2FX1 FX 3 FX 4 FX 5 FX 6 FX 7 FX 8
AUX 2
AUX1
MST
AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 AUX 8
PAN
/ AUX SEND 1
-
8
CH EDIT
/ SELECT / PHRASE SEQ STATUS / AUTOMIX STATUS
FX RTN
IN 17
-
24
AUX MST
TR 17
-
24
TR 1
-
16
QQ
RATIO
GAIN FREQ FREQGAIN FREQGAIN GAIN FREQTHRESHOLD ATTACK RELEASE LEVEL FREQ
EQ Low
EQ High
FADER
WRITE
READ
MANUAL
PRM
MUTE
EQ Lo - Mid EQ Hi- Mid
Dynamics
RTN
PHRASE
REC
PLAY
OFF
TRACK
PHRASE SEQ
MASTER
EDIT
V.F ADER
EDIT
PHRASE
PAD PLAY
AUX
SEND
PHRASE
SEQ
PAD
/AUTOMIX
Filter
L
R
L
R
12
8
13
By applying an effect to the
track mixer, you can apply
effects without modifying
the input signal.