Filter
Top Products
Configuring the SDC 8200 system
101
The displays of the interpreter consoles show the languages assigned
to the A-channel and the B-channel and other related information (see
example illustration on the left).
The interpreter consoles are now ready for operation.
Note!
The max. number of interpreter consoles per booth has to be config-
ured via the central unit (see “Setting the max. number of interpreter
consoles per booth” on page 96 and “Half-automatically initializing all
interpreter consoles on the central unit” on page 99).
Manually assigning an interpreter console an individual desk number (in-
terpreter console number)
To manually assign an interpreter console an individual desk number
(
DESK):
̈ From the central unit’s operating menu, choose “
Interpretation”,
“
Initialise Units” and “Full Init” one after the other.
̈ Press the RELAY 3 key Ƽ of the desired interpreter console and keep it
pressed.
̈ While keeping the RELAY 3 key pressed, press the “MENU ̆” or
“MENU ̄” menu selection key ƿ until the desired desk number (DESK)
is shown on the display.
̈ Press the MIC key ƺ to transmit the selected desk number to the cen-
tral unit.
Note!
If an error occurs during initialization, the text “
Init Refused” is
shown on the displays of the interpreter consoles. In this case, reinitial-
ize the interpreter consoles.
̈ If all booth and desk numbers are assigned correctly, press the ENTER
key on the central unit to save this configuration.
The displays of the interpreter consoles show the languages assigned
to the A-channel and the B-channel and other related information (see
example illustration on the left).
The interpreter consoles are now ready for operation.
Note!
The max. number of interpreter consoles per booth has to be config-
ured via the central unit (see “Setting the max. number of interpreter
consoles per booth” on page 96 and “Half-automatically initializing all
interpreter consoles on the central unit” on page 99).
01 ENG
02 ARA
00 00 00 00
FLO FLO FLO FLO
Initialise Units
1 Full Init
Ƽ
ƿ
Press Mic to confirm
BOOTH DESK
01 02
Full Init
Press ENTER to save
01 ENG
02 ARA
00 00 00 00
FLO FLO FLO FLO