Filter
Top Products
Configuring the SDC 8200 system
113
Upgrading the license of your conference and interpretation system
The SDC 8200 CU and SDC 8200 CU-M central units come with a basic
license, allowing the configuration of four languages/interpretation chan-
nels as well as the “camera control” function.
Please note that only the SDC 8200 CU central unit can be expanded by
purchasing licenses for further languages/interpretation channels. These
licenses (see “Licenses for expanding the SDC 8200 CU central unit” on
page 115) are available from Sennheiser electronic.
To enter a new license code:
̈ From the central unit’s operating menu, choose “
License” and
“
Upgrade License” one after the other.
“
0” is shown on the display.
̈ Turn the jog wheel ᕤ on the central unit until the first character of the
new license code is shown on the display and then press the ENTER key.
̈ In the same way, enter all other characters of the new license code one
after the other until the new license code is entered completely.
If you entered a wrong character:
̈ Press the EXIT key to exit this menu item.
“
Upgrade License” is shown on the display.
̈ Press the ENTER key. “
0” is shown on the display.
̈ Re-start entering the new license code.
License
3 Upgrade License
Upgrade License
0