Open as PDF
TASCAM DP-03 19
Mastering mode cannot be started if you have not
created a stereo master track.
From multitrack mode, press the
MASTERING button once to enter mixdown mode and
once again to enter mastering mode.
2 In this mode, press the PLAY (Á) button to listen to
the stereo master track that you have created.
Confirm that both the
items are shown
. If either is
, the sound heard will be
affected by the equalizer and/or compressor. (See
“Using mastering EQ (equalizer)” on page 57 and “Using
mastering compression” on page 57.)
mode, the MASTER fader cannot be
used to adjust the level.
In this example, we will use the equalizer on the master
track to reduce high frequencies and increase low
1 In mastering mode, press the F1 (
) button to
2 Turn the EQ HIGH knob to the left to lower the
knob shown on the screen. Set the value to
to reduce the high frequencies.
3 Next, turn the EQ LOW knob to the right to increase
knob shown on the screen. Set the
to increase the low frequencies.
4 Press the F2 (
) button to turn the equalizer ON.
at the top left of the screen changes
5 Press the F1 (
) button to return to the Home
6 Press the PLAY (Á) button to listen to the stereo
master track with equalization.
Use the compressor on the stereo master track to adjust
the impact of the entire song.
1 In mastering mode, press the F2 (
) button to
2 Press the F3 (
) button to open the library list.
3 Use the DATA wheel to select
POP ROCK 1
and press the F4 (
) button to return to the
2 – Quick Start Guides