Filter
Top Products
50 TASCAM DP-03
CLEAN OUT TRK screen
IN/OUT/TO
These points are used for editing. To change the IN, OUT
or TO point, use the F3 (§) and F4 (¶) buttons to select
one. Then, use the REW (Ô) (TO ZERO) and F FWD
() (TO LAST REC) buttons to move the cursor and the
DATA wheel to set the time.
IN point editing screen
OUT point editing screen
TO point editing screen
DESTINATION TRK
Select the track that you want to be the destination for a
COPY, INSERT or MOVE operation. The choices depend on
what you have already chosen for the
SOURCE TRK
as
the track to be edited.
When a single track has been set as the
SOURCE TRK
,
the
DESTINATION TRK
choices are
1
to
8
(single
tracks).
When a track pair (for example, 1/2) has been set as the
SOURCE TRK
, the
DESTINATION TRK
choices are
1
/
2
,
3
/
4
,
5
/
6
and
7
/
8
(track pairs).
When
1-8
(all tracks) has been set as the
SOURCE TRK
,
the
DESTINATION TRK
choice is
1-8
(all tracks). In
other words, this setting cannot be changed in this case.
COPY TIMES
Set the number of times that the copied section will be
pasted. Set the number between
1
and
99
.
COPY/PASTE
This function copies the audio data from between the IN
and OUT points on the COPY source track, and pastes it
on the COPY destination track starting from the TO point.
This operation does not change the COPY source track.
This operation overwrites recorded data on the COPY
destination track. Therefore, the length of the COPY
destination track is not changed.
You can make multiple copies in a single operation. In
other words, you can overwrite the COPY destination
track from the TO point with a designated number of
repetitions of the COPY data.
The following parameters are used in this operation.
SOURCE TRK (
•
1
to
8
,
1
/
2
,
3
/
4
,
5
/
6
,
7
/
8
,
1
-
8
)
IN/OUT/TO
•
DESTINATION TRK
•
COPY TIMES
•
COPY/INSERT
8 – Editing Tracks