Tascam dp 03 Music Mixer User Manual

Messages Meaning and remedy
Protected Card
To record or edit, turn off the unit and un-protect the SD card.
Same Track
You cannot clone a track to itself. ("CLONE track (track duplication)" on page 52.)
SD Size Error
Use an SD card larger than 512 MB.
Song Protected
The song is protected ("Protecting songs" on page 37) and you are trying to change
it (record or edit, etc.). Unprotect the song.
Too Many songs
You have 250 songs on one partition. You must delete some before you can create
another song.
Track Full
This message appears if you try to import a file when all tracks already have
recordings. (See “Importing tracks” on page 67.)
Trk Edit Fail
Save the song and turn the unit off and then on, and perform track edit again.
Trk Too Short
You are trying to enter mixdown mode but the time between the IN and OUT points
is too short. Make the time longer (more than 4 seconds). (“Using IN, OUT and TO
points” on page 46”)
Work Memory Full
Even if the card has enough remaining memory space, this error may occur when
you record a long song or edit a lot.
You may be able to continue the work if you clear the history ("Erasing the operation
history" on page 42.) which may increase the open work memory.
You may also be able to continue work by turning the unit off and then on again,
which may increase the open work memory.
Audio Rst Fail
If any of these errors occur, turn the the unit power OFF and restart it.
If these error message continue to appear, please contact a TASCAM Service Center.
Device Error
FX Busy
FX Rx Failed
/F Error
Mount Error
SaveParam Fail
SD-Card Error!
SD Not Found
SD Read Busy
SD Write Busy
16 – Messages