Filter
Top Products
Glossary
Glossary–6
VX4380 256-Crosspoint Relay Matrix Module User Manual
perform according to a given set of standards. A self test routine is per-
formed upon power-on.
Servant
A VXIbus message-based device that is controlled by a commander.
Server
A shared memory device that controls the shared memory buffers used in a
given Shared Memory Protocol channel.
Shared Memory Protocol
A communications protocol that uses a block of memory that is accessible to
both client and server. The memory block operates as a message buffer for
communications.
Slot 0 Controller
See Slot 0 Module. Also see Resource Manager.
Slot 0 Module
A VXIbus device that provides the minimum VXIbus slot 0 services to slots
1 through 12 (CLK10 and the module identity lines), but that may provide
other services such as CLK100, SYNC100, STARBUS, and trigger control.
SMP
See Shared Memory Protocol.
STARX
Two (2) bi-directional, 50 W, differential ECL lines that provide for
inter-module asynchronous communication. These pairs of timed and
matched delay lines connect slot 0 and each of slots 1 through 12 in a
mainframe. The delay between slots is less than 5 ns, and the lines are well
matched for timing skew.
STARY
Two (2) bi-directional, 50 W, differential ECL lines that provide for
inter-module asynchronous communication. These pairs of timed and
matched delay lines connect slot 0 and each of slots 1 through 12 in a
mainframe. The delay between slots is less than 5 ns, and the lines are well
matched for timing skew.
STST
STart/STop protocol; used to synchronize modules.
SYNC100
A Slot 0 signal that is used to synchronize multiple devices with respect to a
given rising edge of CLK100. These signals are individually buffered and
matched to less than 2 ns of skew.
Synchronous Communications
A communications system that follows the “command-response” cycle