Filter
Top Products
Command Descriptions
VX4380 256-Crosspoint Relay Matrix Module User Manual
3–51
ABORt, ROUTe:SCAN
TRIGger[:SEQuence]:SOURce
TRIGger[:SEQuence]:COUNt
TRIGger[:SEQuence]:DELay
Sequence to the next relay in an initiated scan list without waiting for a trigger
event and without waiting the time specified in a TRIGger[:SEQuence]:DELay
command.
Command Response
route:scan
(@m1(1,2),m2(1:64))
Define a scan sequence consisting of relays 1 and 2 on relay
module “m1” and relays 1 through 64 on module “m2”.
trigger:sequence:
count 2
Define the number of times to sequence through the scan list
before setting the state of the trigger subsystem back to the
idle state.
trigger:sequence:
delay 0.5
Wait 0.5 seconds after a trigger event is detected before
opening the current relay in a scan list and closing the next
relay in the list.
trigger:sequence:
source ttltrg2
Sequence to the next relay in a scan list when VXI TTL trigger
2 is asserted.
initiate:immediate Initiate the scan sequence. Sequence through the entire scan
list 2 times. Wait 0.5 seconds after VXI TTL trigger 2 is
asserted before sequencing to the next relay in the list.
trigger:sequence:
immediate
Sequence to the next relay in the scan list without waiting for
VXI TTL trigger 2 to be asserted. Do not wait 0.5 seconds to
sequence to the next relay.
TRIGger
[:SEQuence]
:SOURce BUS | HOLD | IMMediate | TTLTrg<n>
N/A
IMMediate
N/A
ABORt, ROUTe:SCAN
TRIGger[:SEQuence]:[SOURce]
TRIGger[:SEQuence]:[IMMediate]
Related Commands
Description
Examples
Command Syntax
Query Syntax
*RST Value
Limits
Related Commands