Filter
Top Products
Command Descriptions
VX4380 256-Crosspoint Relay Matrix Module User Manual
3–25
Command Response
trigger:seq:imm Override the hold placed on triggers. Open channel 1, then
close channel 2 on the VX4380.
trigger:seq:sour imm Remove the hold placed on triggers. Set the trigger source to
immediate. This causes sequencing of the scan list indefinitely
or until an ABORt command is received.
ABOR Return the trigger subsystem to the idle state. Open the
currently closed relay in the scan list.
initiate:immediate Place the trigger subsystem in the arm state, sequence through
the scan list twice, then return the trigger subsystem to the idle
state.