Filter
Top Products
Command Descriptions
3–32
VX4380 256-Crosspoint Relay Matrix Module User Manual
Command Response
open (@m1(1:64)) Open all relays in section 1 of the first VX4380, then wait 0.1
seconds.
open? (@m1(1:64)) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
This response indicates that all relays in section 1 of the first
VX4380 are open.
[ROUTe:]OPEN
:ALL [module_name]
N/A
All relays on all modules are set to the open position.
N/A
[ROUTe:]CLOSe,
[ROUTe:]MODule:DEFine
If a module name is not specified in this command, open all relays on all
modules controlled by the Option 01. If a module name is specified, open all
relays on the specified module only. In either case do not change the state of the
configuration relays on VX4380 Modules.
Command Response
ROUTE:OPEN:ALL Open all relays on all modules controlled by the Option 01. Do
not change the state of the configuration relays on VX4380
Modules.
rout:open:all Same as the first example.
route:open:all gp Open all relays on the module that has been assigned module
name “gp”. See the [ROUTe:]MODule:DEFine command.
[ROUTe:]OPEN
:DWELl <module_name>,<nrf>
N/A
Command Syntax
Query Syntax
*RST Value
Limits
Related Commands
Description
Examples
Command Syntax
Query Syntax