Filter
Top Products
Command Descriptions
3–50
VX4380 256-Crosspoint Relay Matrix Module User Manual
N/A
0
The time specified in this command must be between 0.001 and 6.5535 seconds.
ABORt, ROUTe:SCAN
TRIGger[:SEQuence]:SOURce
TRIGger[:SEQuence]:IMMediate
This command specifies the time to wait after a trigger event is detected before
sequencing to the next channel in a scan list.
Command Response
route:scan
(@m1(1,2),m2(1:64))
Define a scan sequence consisting of relays 1 and 2 on relay
module “m1” and relays 1 through 64 on module “m2”.
trigger:sequence:
count 2
Define the number of times to sequence through the scan list
before setting the state of the trigger subsystem back to the
idle state.
trigger:sequence:
delay 0.5
Wait 0.5 seconds after a trigger event is detected before
opening the current relay in a scan list and closing the next
relay in the list.
trigger:sequence:
source ttltrg2
Sequence to the next relay in a scan list when VXI TTL trigger
2 is asserted.
initiate:immediate Initiate the scan sequence. Sequence through the entire scan
list two times. Wait 0.5 seconds after VXI TTL trigger 2 is
asserted before sequencing to the next relay in the list.
TRIGger
[:SEQuence]
:IMMediate
N/A
N/A
N/A
Query Syntax
*RST Value
Limits
Related Commands
Description
Examples
Command Syntax
Query Syntax
*RST Value
Limits