Filter
Top Products
Command Descriptions
3–20
VX4380 256-Crosspoint Relay Matrix Module User Manual
Command Response
route:close
(@m1(1:10))
Close the relays that connect row 1 to columns 1 through 10 in
section 1 of the first VX4380, wait 0.1 seconds then pulse VXI
TTL triggers 1 and 4 low for 3 msec.
route:close
(@m2(2!9!3,1!16))
Close the relay that connects row 2 to column 9 in section 3
and the relay that connects row 1 to column 16 of section 1 of
the second VX4380. Wait 0.2 seconds, then pulse VXI TTL
triggers 1 and 4 low for 3 msec.
output:ttltrg4:State
off
Disable VXI TTL trigger 4.
close
(@m1(1!1!2),m2(1!1!2),
m3(1!1!2))
Close the relay that connects row 1 to column 1 in section 2 of
each of the VX4380 Modules, wait 0.5 seconds, then pulse VXI
TTL trigger 1 low for 3 msec.
[ROUTe:]CLOSe
:DWELl<module_name>,<nrf>
N/A
The close dwell time of all modules is set to 0 seconds.
The value of the time specified in this command must be between 0 and 6.5535
seconds.
[ROUTE:]CLOSe
[ROUTe:]SCAN
OUTPut:TTLTrg<n>[:STATE]
Set the time to wait after closing a relay before proceeding and pulsing any
enabled VXI TTL trigger signals.
In this example the Option 01 is installed on a VX4380 Module.
Command Response
output:ttltrg1:state
on
Enable VXI TTL trigger 1.
route:close:dwell
m1,.25
Set the close dwell time for the VX4380 to 0.25 seconds.
Command Syntax
Query Syntax
*RST Value
Limits
Related Commands
Description
Examples