Yamaha AW1600 Musical Instrument User Manual


 
Writing audio data (Track At Once)
10
Creating an audio CD
105
AW1600 Owner’s Manual
4
Move the cursor to the NEW button, and
press the [ENTER] key.
The song list will show information (track number/
song name/size of the stereo track) for the song that
will be written to track 1 of the CD.
5
Move the cursor to the dotted frame in the
song list, and turn the [DATA/JOG] dial to
select the song that will be written to track
1.
6
Repeat steps 4 and 5 to select the songs
that will be written to track 2 and following.
7
Move the cursor to the EXECUTE button
and press the [ENTER] key.
A popup window will ask you to confirm.
8
To begin writing, move the cursor to the OK
button and press the [ENTER] key.
While data is being written to the media, a popup win-
dow will indicate “CD Writing...” When writing is
completed, a popup window will ask you whether you
want to finalize.
9
To finalize the disc, move the cursor to the
OK button and press the [ENTER] key.
If you do not want to finalize the disc, move the cursor
to the CANCEL button and press the [ENTER] key.
This completes the writing process.
When you turn the [DATA/JOG] dial, you will see only songs
for which the current stereo track contains data.
Songs with a stereo track shorter than four seconds will not
be displayed.
NOTE
When you move the cursor to the NEW button and press the
[ENTER] key, a new song will be added at the end of the
existing songs.
By using the INS button instead of the NEW button, you can
insert a new song immediately before the song that is
selected in the list.
•You can use the DEL button to delete the currently selected
song from the song list.
HINT
When you add a song to the song list, the same song will
always be initially selected. Change this as desired.
NOTE
If an error message of “BUFFER UNDERRUN!” appears while
writing, a buffer underrun has occurred. In this case, either
decrease the writing speed to 4x or set the UNDERRUN
PROTECT button to the ENABLE position (
p. 103).
If you enabled the writing test in “Basic settings for the CD-
RW drive” (
p. 103), a writing test will be performed before
the data is actually written. If a problem occurs during the
writing test, an error message will appear.
Copy-prohibit data will automatically be written into the CD
that is created.
NOTE