Filter
Top Products
69
AW1600 Owner’s Manual
7
Various types of playback
D MEAS
Shows the position of each marker, in measure/beat
units.
E DELETE button
To delete the currently selected marker, move the cur-
sor to this button and press the [ENTER] key.
5
Move the cursor to the MARKER area, and
turn the [DATA/JOG] dial to scroll the list so
that the dotted frame encloses the marker
number that you want to edit.
6
Move the cursor to the value that you want
to edit, and turn the [DATA/JOG] dial to edit
the value.
If necessary, you can erase a previously-registered locate point (except for the Relative Zero,
Start, and End points) or marker.
To erase a locate point, hold down the [CANCEL] key in
the Locate section, and press the corresponding locate key
([IN]/[OUT] key, [A]/[B] key). That locate point will be
erased, and a message of “LOCATE POINT ERASED”
will be displayed for a time.
You can erase a marker in one of two ways; using key
operations, or in the screen.
To erase a marker using key operations, locate to the
marker that you want to erase. Then hold down the [CAN-
CEL] key of the Locate section and press the [MARK]
key. The corresponding marker will be erased, and a mes-
sage of “MARK POINT ERASED” will be displayed for
a time.
To erase a marker by operations in the screen, access the
list of markers in the POINT page of the SONG screen,
select the marker that you want to erase, move the cursor
to the DELETE button and press the [ENTER] key.
•You cannot change the location beyond the next or previous
marker.
NOTE
Erasing a locate point or marker
•A locate point that you erase cannot be recovered.
NOTE
■ Erasing a locate point
■ Erasing a marker
Adjusting the position of a locate point or marker • Erasing a locate point or marker