Filter
Top Products
AW1600 Owner’s Manual
Basic operation for libraries and scene memories
8
Using libraries and scene memories
76
Here’s how you can assign a new name to existing library
or scene data.
1
Access the page for the desired library or
scene memory.
The illustration below shows an example of when you
have selected the LIBRARY page of the EQ screen.
2
Turn the [DATA/JOG] dial to scroll the list so
that the library data or scene you want to
rename is enclosed by the dotted frame.
3
Move the cursor to the TITLE button and
press the [ENTER] key.
The TITLE EDIT popup window will appear.
4
Assign a name to the data. Then move the
cursor to the OK button and press the
[ENTER] key. (For details on assigning a
name → p. 25)
The edited name will be finalized.
Naming library or scene data
• The input library and mastering library, and the EQ, dynamics, or
effect libraries accessed from the INPUT SETTING popup window
are all read-only, and therefore have no TITLE button.
NOTE
• If you selected read-only data (indicated by a “lock” icon) in
step 2, a message of “Read Only” will appear, and you will be
unable to edit the name.
NOTE