Filter
Top Products
AW1600 Owner’s Manual
Assigning input signals to tracks (Direct recording)
5
Track recording
44
● Monitor signal flow during recording
11
To adjust the pan of the monitor signal,
press the [TRACK SEL] key for the corre-
sponding track channel, and turn the [PAN/
BAL] knob of the Selected Channel section.
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Mixer section
Track
channels
Stereo
output
channel
Recorder section
from the input
channels
Stereo bus
• The pan setting of an input channel will have no effect if that
input channel is assigned to a track by direct recording.
NOTE